Skip to content
Nanoxia is open and working in compliance with the State of California and CDC Guidelines.
Nanoxia is open and working in compliance with the State of California and CDC Guidelines.

Hydra I 8 GPU Medium Tower Case

by Rexgear
$ 199.99
  • Features
  • Overview
  • Specs

Optimized for 8 GPU: Install up to 8 dual slot reference cards with standard PCB/cooler up to 300 mm length and 150 mm height (flush position).

Leading Versatility: 3-in-1 chassis design for GPU number crunching, bold looking PC gaming, and quick access test bed.

Bottom Mounted Fans: Install up to 3 x 120mm high rpm server fans that blow hot air out of the case from bottom to top.

Open air design: For enthusiasts who want to use this case as test bench and quickly swap GPU, CPU or MB.

Rear mounted motherboard: Extended distance from motherboard to cards for easy installation, and up to 85 mm of clearance for CPU coolers (flush position).

Dual power supply: Use two power supplies for improved power distribution and efficiency when just one is not enough for your cards.

The Hydra 1 is a custom made mid-tower case for high density GPU mining using 8 reference cards with smaller PCB/cooler up to 300 mm. The top GPU bar switches from 8x dual slot to 6x triple slot for wider spacing when only using 6 cards. This case supports one ATX/Micro-ATX motherboard and two power supplies for better power distribution. If you want to use this case as a bench or test bed, it is great for that too with an open-air chassis design that lets you get in and swap cards easily. There are two aluminum handles on top so you can just grab and go. Thick industrial quality steel offers outstanding strength and durability to hold all your cards without flexing for safer storage and transport. The motherboard is mounted behind the case with 85 mm of clearance for CPU coolers. Extended distance from MoBo to GPU allows optimal placement of your cards and you can install 3 x 120mm fans at the bottom.

Compared to the Hydra VII case, the Hydra I is smaller in size. Users with aftermarket GPUs larger than 11.5 inches should consider Hydra VII instead.

Model

RGHYA1

Case Type

Medium Tower Case

Case Dimensions
(H x W x D)

H 400mm x  W 305mm x D 632mm
(15.7" x 12.0" x 24.8") without handles

Case Drive Bays

(x2) 2.5"/3.5" (internal)

Case Fan Mounts

Bottom: 3 x 120mm

GPU Mounts

8 or 6

Motherboard

ATX, Micro-ATX

PSU Mounts

2

Max CPU Cooler Height

85mm (3.3")

Radiator Compatibility

Bottom: thin 360mm

Max GPU Length

295mm (11.5")

Max PSU Length

295mm (11.5")

Package Includes

(x3) 120mm fan grills
(x2) Aluminum handles
(x1) Power switch
(x1) Bag of screws for PSU, MB, HDD, SSD,
Fans, cable ties and nut setter for MB standoff

Customer Reviews

Based on 17 reviews Write a review