Skip to content
Nanoxia is open and working in compliance with the State of California and CDC Guidelines.
Nanoxia is open and working in compliance with the State of California and CDC Guidelines.
Deep Silence 5 Full Tower Case

Deep Silence 5 Full Tower Case

by Nanoxia
Sold out
$ 399.99
$ 324.99
  • Features
  • Overview
  • Specs

Heavy duty full tower
Built like a tank with ultra thick metalwork; Excellent choice for professional users who require strength, durability and silence while running their programs for hours.

Ultimate in silence
With a lot of mass around the perimeter, decoupled drive mounts, and seriously dense sound proofing materials, this is our best computer case for sensitive audio workstation at recording facility.

Huge open space
Completely removable modular drives cages for direct airflow path; Includes 8 HDD sleds and 6 SSD cage; Expandable to 15 HDD/SSD via additional drive cages and 5.25 inch to 3.5 adapters.

Slim radiator ready
One slim 280 mm radiator (max thickness 43 mm) at the top and one thick 240 mm radiator at front (with 2 of 3 HDD cages removed); The use of low-profile RAM may be required.

Easy to clean fans and filters
Tool-less front fan brackets and dust filters swing out for easy cleaning without opening the case.

Easily tune air flow + sound level
Top panel air covers can be removed for increased airflow; Includes 6 x 3-pin fan controller and 3 high quality rifle bearing fans.

The Deep Silence 5 by Nanoxia is one massive, monolithic, and silent full tower for professional users. Not only does the large size afford ample room for anything you care to put in it, this case gives you exceptional sound isolation for better recordings, especially when doing voice over work with minimum noise leaks into microphone. This case supports Extended ATX (i.e. ASUS X99 Sabertooth LGA 2011-V3) and SSI-EEB server motherboards (i.e. ASUS Z10PE-D8 WS or AsRock EP2C602-4L/D16). Please note some EEB/CEB motherboards do not use the same mounting holes as E-ATX motherboards and some mounting holes may not line up. You can fit one slim 280 mm radiator (max thickness 43 mm) at the top and one thick 240 mm radiator with push/pull at front, and large CPU coolers (i.e. Noctua NH-U9DXi4 or Thermalright Venomous X RT Rev SB-E Heatsink). This case also supports large number of case fans and HDD/SSD drives (for RAID or NAS). A maximum of 15 HDD/SSD is possible through the acquisition of additional drive cages and 5.25 inch to 3.5 adapters. With a lot of mass around the perimeter, decoupled drive mounts, and seriously dense sound proofing materials, this is our best computer case for sensitive audio workstation at recording facility. The included case fans are high quality rifle bearing, pull in a lot of air and very quiet. The dust filters are easily accessible and the front fans even swing out to be cleaned without opening the case. On the back of the motherboard there are plenty of cable management mounts, hooks and straps to help you route and hide cable paths. All the screws you need to assemble components in this case are inside a box with clearly labeled bags, and even includes two power extension cables to make sure the motherboard's EPS and ATX power lines can be reached without problem. The Deep Silence 5 is one massive full tower case built like a tank. If you are planning to move this case, we hope you are strong!

Model Deep Silence 5 Rev. B
Case Type Full Tower
Motherboard E-ATX, XL-ATX, ATX, Micro-ATX, Mini-ITX
Dimensions (HxWxD) H 552mm x W 232mm x D 550mm
(21.7" x 9.1" x 21.6") without case feet
Max Radiator Size Top: slim 280mm (max thickness 43mm)
Front: thick 240mm (with 2 of 3 HDD cages removed)
Rear: 140mm
Max GPU Length 338mm (468mm with upper HDD cage removed)
Max CPU Cooler Height 185mm
Drive Bays (x4) 5.25" external
(x1) 3.5" external (adapter)
(x8) 2.5"/3.5" internal (max 11)
(x6) 2.5" internal
Fan Mounts Front: (x2) 140mm
Rear: (x1) 140mm
Top: (x2) 120/140mm
Bottom: (x1) 120/140mm
Includes (x2) Air Covers
(x2) Tool-less fan brackets with dust filters
(x2) Fan controller with six 3-pin connectors
(x2) 140mm 1100rpm fan (front)
(x1) 140mm 1100rpm fan (rear)
(x2) USB 3.0
(x2) USB 2.0
(x1) Microphone
(x1) Headphone
(x1) Dust filter (bottom)
(x1) EPS extension cable
(x1) ATX extension cable

Related products

Customer Reviews

Based on 7 reviews Write a review