Project S Fully Fledged HTPC Case Silver

$ 219.99 $ 249.99

The high-end HTPC case provides sufficient space for ATX motherboards and standard ATX power supplies. Two 3.5 inch HDDs and three 2.5 inch SSDs can be accommodated within the case. The 3.5 inch drives are installed in a special HDD holder, which can be removed to create space for radiators or additional fans.

Equipped with many practical features, such as fully modular HDD brackets, magnetic dust filters, a top made of scratch-resistant, tempered glass, or the opportunity to install several radiators, there is also another unique feature of the Project S. It can be used in upright position as a midi tower. By using highest quality materials it also ensures maximum stability for the Project S.

The absolute highlight of the Project S is certainly the sophisticated drawer design. The drawer can be easily pulled out for installation or maintenance of the system – even if the hardware is fully installed, and during operation. The top is made out of tempered glass, which still allows an unobstructed view on the installed hardware. Since the tempered glass is scratch-resistant, a monitor can be placed on the top, if desired.

The I/O-Panel can be found in the right corner of the front panel, which includes 2 x 3.0 USB and 1 x 3.1 Type C USB, as well as the mandatory audio jacks. The power, reset and the LED on/off switch are located above of the USB-ports.  The noble and intentionally simple front design is highlighted again by an RGB LED strip, which decorates the lower part of the front. It is possible to choose between the different colors with a simple push on the LED switch on the I/O-Panel. It is also possible to disable the LED at any time.

A 120 mm fan from the CoolForce fan series is preinstalled in the back. Eight case fans can be mounted in total: Behind the front, two 120 or 140 mm fans can be installed. In addition, there are mounting spaces for three 120 mm fans on the right side and two 120 mm fans on the left side*, in order to increase the cooling capacity. To prohibit dust from entering the interior, there are magnetic dust filters on both sides.

The Project S can be efficiently equipped with radiators or compact water cooling solutions. Not only behind the front panel, but also on both sides. A 240 or 280 mm radiator or compact water cooling solution can be mounted behind the front. The right side panel takes in turn a 120 or 240 mm radiator, and the left side allows the installation of a 120 mm radiator*.

Graphic cards with a length of up to 400 mm and space for CPU coolers with a maximum height of 170 mm can be accommodated in the Project S.

Features

DRAWER DESIGN
The absolute highlight of the Project S is certainly the sophisticated drawer design. The drawer can be easily pulled out for installation or maintenance repair of the system – even if the hardware is fully installed, and during operation.
IMPROVED LAYOUT
The high-end HTPC case provides sufficient space for ATX motherboards and standard ATX power supplies. Two 3.5 inch HDDs and three 2.5 inch SSDs can be accommodated within the case. The 3.5 inch drives are installed in a special HDD holder, which can be removed to create space for radiators or additional fans. Fit virtually any modern GPU on the market with space for graphic cards up to 400mm. Leave the days of minimum graphic card requirements behind.
WATERCOOLING READY
Fits 240/280mm radiator at the front, 120mm/240mm at the right side, and 120mm at the left side. For all you watercooling enthusiasts out there, this is surely on top of your wishlist.
TEMPERED, SCRATCH-RESISTANT GLASS
Get a clear, unobstructed view of your beautiful build with our clean, tempered, scratch-resistant glass. Lay it on the side or place a monitor on top, the glass allows the case to be laid out in a variety of ways.
PRE-INSTALLED WHEELS
The Project S drawer feature includes pre-installed wheels to allow mobility and easy access to your hardware components. This will allow you to spin the case whatever direction when you are building your computer.

TECHNICAL DATA
Model: Projec S - Black & Silver
Case Type: HTPC
Form Factor: ATX, Micro-ATX, Mini-ITX
2.5 inch drive bay internal: max. 5
3.5 inch drive bay internal: 2
Case Fan (Front): optional 2 x 120/140 mm
Case Fan (Rear): 1 x 120 mm
Case Fan (Left Side): 2 x 120 mm
Case Fan (Right Side): optional 3 x 120 mm
Length (Approx.): 18.11 inches
Width (Approx.): 19.29 inches or 9.84 inches
Height (Approx.): 9.84 inches or 19.29 inches
Material: Steel, aluminium, tempered glass
Weight (Approx.): 25.75 lbs.
Maximum installation height of CPU coolers: 170 mm
Maximum VGA Card Length: 400 mm
UPC NXPSS: 4260285294167
User Manual: DOWNLOAD


    Comparison Chart

    Customer Reviews

    Based on 1 review Write a review
    Share this